Interesting Information About Veneer Brick

  • Print Article |
  • Send to a Friend |
  • |
  • Add to Google |

Primarily resulting from its composition, veneer brick can act as a wonderful material with which to build. When using this brick style, there are many advantages to be had. In the installation process of standard brick, it is typically a lot easier to put in this brick type. It is also generally simpler to maintain this material than compared to other potential building supplies.

Standard bricks and brick veneer are very different. Mostly it is created from a combination of clay, gravel, and cement. They can also be made out of polyurethane, as well. In other cases, some companies create these bricks using recycled materials from old or destroyed buildings.

There are quite a few advantages that result from using this kind of material. The most widely enjoyed benefit is the price difference. These materials are generally a lot cheaper when comparing their price tag to standard brick types. Since the bricks only use about a quarter of the ingredients normal bricks do, their price can be significantly lower. Additional advantages include being fireproof and durable, along with acting as great insulation.

Also the total price for installing these bricks are cheaper, as well. Typically it is better to hire a mason to install your brick veneer, but you do not have to do so. When studying the installation of normal brick compared to brick veneer there is a drastic difference. Most find that it does not take nearly the same amount of energy, effort, time, or skill to install this kind of brick. It is lightweight, which can make installing it even easier. However, keep in mind that this brick type can not hold a lot of weight by itself.

Again, it is best to let a professional install these bricks. If you wish to do the installation by yourself, insure you remember a few key points. Since they are only about one inch thick, there are two ways to install brick veneer. You can bond it directly to the area in which you want it placed. The other method is installing it as a single unit after you have mounted it to a piece of plywood.

If you decide to utilize this building component as outdoor siding, for example, remember that it is a very porous item. Air and water will absorb into the bricks. Water damage is the most common problem that results from this issue. In order to avoid this, just make sure to use a vapor barrier when installing the bricks. That will allow the wall and brick to remain separate.

Sealants should always be used in cooler climate zones. Once exposed to frost these thin bricks will begin flaking if a sealant is not utilized. Stains might also make an appearance on the brick's surface. Mildew, moss, and hard water have the tendency to build up on the surface over time. After a simple wash and scrubbing, these stains are generally easily removed.

Often used go give pleasing and aesthetic looks, brick veneer is able to be both eye pleasing as well as a money saving material. You can use these bricks in many ways, everything from on walkways and in gardens to around your fireplace. They also have their practical uses as well, allowing you to use them as counter tops and floors if you wish. This material has several advantages and benefits. Veneer panels will give your areas a classic look, without having to cope with the high price of standard brick.

Rate this Article:
  • Article Word Count: 575
  • |
  • Total Views: 68
  • |
  • permalink
  • Print Article |
  • Send to a Friend |
  • |
  • Add to Google |
>